Dog pee is highly acidic and full of salts, which breaks down the ultimate finish and speels into the grain. Sometimes, it leaves dark and stubborn stains and dull patches on the floor. It also causes wood to warp & swell, and crack over time. If you don’t clean over time, the odor will penetrate deeply into the floorboards.
Keeping this in mind, Dubai Rubber shares expert methods for cleaning dog urine from wood floors. By following our procedures, you will end up having a neat and clean wood floor. All these methods are budget-friendly and easy to perform.
Let’s explore them.
Top 8 DIY Methods To Clean Dog Pee From Wood Floors
After refining hundreds of wood floor cleaning methods, we have shortlisted the most effective & highly recommended ways. They are experienced, easy-to-perform, and quick ways to make your wooden tiles and planks odor-free. And here they are:
- Quick Dry Blotting
- Baking Soda Absorption
- Cornstarch Powder Poultice
- Vinegar Damp Wipe
- Peroxide Spot Dab
- Enzyme Odor Neutralizer
- Mineral Oil Buff
- Light Sand & Seal
Let’s explore them one by one in detail:
1. Quick Dry Blotting
One of the early adopted dog pee cleaning methods includes blotting the pee immediately using a microfiber cloth or paper towels. It prevents staining & deep seeping, and protects the finish from getting damaged. We recommend you press firmly the towel or cloth, rather than wiping, because it might spread the moisture. Plus, discard used cloth pieces to prevent lingering smell.
2. Baking Soda Absorption
The baking soda has natural properties to draw out moisture and neutralize odors. We recommend you sprinkle it directly on the damp spot and leave it for hours, so it can give you the best results. After that, sweep it away or vacuum. It will tackle wetness and odors simultaneously without any damage to the floor. You can opt for this method for all types of indoor and wood outdoor flooring.
3. Cornstarch Powder Poultice
Dog urine has a big problem, which is usually stored in small wood gaps, while cornstarch powder works as a natural poultice to absorb it. You need to simply cover the damp area with a cornstarch layer and let it sit for a few hours. It will absorb moisture, reduce the chances of damage, and limit odor setting. It will ensure a neat, clean, and moisture-free wood flooring surface.
4. Vinegar Damp Wipe
Here’s another method to get your wooden floors free from pet urine and its smell. Mix equal parts of vinegar and water to make a solution, and lightly dampen a microfiber cloth in it. Then, apply it to the floor surface to eliminate the unpleasant smell of ammonia in the urine and residue.
You can finish the process by dry cleaning with a towel. It would be great to use this method immediately before the urine begins to set. It will equally work for engineered and solid wood flooring.
5. Peroxide Spot Dab
Get hydrogen peroxide and dip a cotton ball into it, and gently apply it to the affected area. It will strongly break down the compounds in urine that cause stains and prevent discoloration. Do not apply too much hydrogen peroxide, and dry the area after applying it. This is an advanced method that is usually applied when you don’t get satisfying results from baking soda application.
6. Enzyme Odor Neutralizer
Dog pee has proteins that produce odor and last longer, so we recommend you apply wood-safe enzymatic odor cleaners because they break down these proteins and eliminate odors. This method is widely adopted because it does not mask the odor while eliminating the root of the smell.
Opt for this method, especially when the traditional ones have failed and you have strong wood parquet flooring. Surely, neat and clean wood blocks in geometric patterns will enhance your interior decor.
7. Mineral Oil Buff
Cleaning dog pee and drying the space might not be enough to get the wood shine back. We recommend you apply a small amount of mineral oil with a soft piece of cloth on the floors and buff gently. It will restore the original shine of your wood floor tiles and planks, and create a barrier to prevent future accidents.
Pay Attention – Do not sprinkle too much oil and buff floors because it might attract dust particles and cause accumulation.
8. Light Sand & Seal
If stains and odors remain and they continue to damage your wood floors, go for this method. We recommend you sand the affected area with fine-grit sandpaper to remove the top wooden layer. After that, apply a thin coat of polyurethane. It will match wood polish and restore the shiny appearance of your flooring. Make sure you remove the layer perfectly, keeping evenness as a priority.
The Bottom Line
Finally, we discussed the most experienced DIY methods to clean dog urine from wood floors without any damage in this article. We shared how quick-dry blotting plays an important role in absorbing moisture, neutralizing the power of baking soda, and the effectiveness of fan air drying. For neutralizing odors, you can also promote the use of enzymatic cleaners.
Our top DIY methods to clean dog pee from your specialized wood tiles and planks also include mineral oil buffing, light sand & sealing, and peroxide spot dabbing. You can use cornstarch powder, poultice, vinegar, damp wipes, and more. To get additional tips to shine your indoor and outdoor wood floors, connect with us today and discuss.
